CHERAMIC TYPE

http://www.itm.hu/

CHERAMIC TYPE

Electrical contact surface of the bottom (of the cheramic slab): about 7 cm2

Mass: about 0.6 kg

Diameter (D): 60 mm

Height (H): 100 mm

The body-block of this electrode has been manufactured from a monolithic PP rod by turning, and the holder of the ceramic slab (made of the same material as the block) join the block of the electrode by screw-thread and sealed by O-ring.The cable outlet-body join the block also by screw-tread and sealed by O-rings.

So this electrode is usable in the very wet environment moreover under water until pressure 10 at (for example in wells at depth about 100 m).

Temperature drift in case of natural environment: about ±0.1±0.01 mV/C, using at around 20 Co.

Self-noise level: 0.001- 0.01 mV depending on he frequency.

Result of test measurements: http://www.nonpolarizingelectrode.com/results_of_test_measurements_temperature_effect

Our distributor and exporter:
Dr. Simon András
senior geophyisicist, entrepreneur,
Phone: +36 1 2261870,
Mobil: +36 30 2123517,
www.nonpolarizingelectrode.com

Details and more information (purchasing, contact, development, results of test measurements, e.t.c) you can find at this contact.

Display: List / Grid
Show:
Sort By:
NON-POLARIZING ELECTRODE, LONG CHERAMIC SLAB (WLC)
NONPOLARIZING ELECTRODE, LONG CHERAMIC SLAB (WLC) TYPE Electrical contact surface of the bottom (..
@
Featured
Glass cleaner 1L
11.70€
Car Shampoo 1L
13.50€
Car Shampoo  5L
35.10€
Clay Lube 1L
17.50€
Medium Polish 1L
20.40€
Quick Wax 0,5L
7.20€
Quick Wax 1L
11.52€
Liquid Wax 0,5L
19.00€
Nano Glaze 150ML
10.40€
Nano Glaze 0,5L
17.10€
Nano Polish 0,5L
14.90€
Liquid Wax 225ML
13.90€