• Phone: 06 (1) 282-8881
  • wolf@wolf.hu

WP 6G HEAVY CUT POLISH - CUT IT 225 ML

Description

The clear coats on many today’s vehicles are intended to be more scratch-resistant and therefore much harder and can prove more challenging to polish than finishes of the past. WP-6G was specifically designed to combat ceramic and other hard clear coats and removes heavy swirling and wet sanding marks with ease. Unlike other heavy polishes that tend to leave an uneven cut behind after compounding, Wolf’s “Cut It” heavy compound eliminates scratches and leaves an exceptionally uniform finish ready for refining or final polishing. Body shop safe, low solvent content.

Directions

On a clean surface, spread the polish evenly at a low speed (rotary 600-900 RPM or DA 2-3) and then work the polish in at 1500-2200 RPM or DA 5-6 *depending on paint type and hardness* with moderate pressure and allow ample time for it to properly break down. Once corrected, reduce the polishing speed and continue polishing the surface until the desired level of refinement has been achieved. For use with a rotary polisher, DA or by hand.

EUH210 - “Safety data sheet available on request.”



Product Features