• Phone: 06 (1) 282-8881
  • wolf@wolf.hu

coat cleaning

Clear-coat cleaning before polishing (clay bar)

Wolf’s chemicals clay bar package (clay bar + clay lubricant) removes tree sap, tar, and other unwanted contaminants efficiently but gently.



Advices for using clay bar:



Usually clay baring is the cleaning before polishing. We do not recommend clay baring if you are not going to polish the surface after. Before clay baring, you should wash, and dry the surface properly. You should always use the clay bar with it’s lubricant.

After the clay bar got dirty, or full with contaminants, you should massage or clean the clay with it’s lubricant until you get a nice and clean surface. Always keep the surface wet when using the clay bar. Save the clay bar from freeze, keep it in cellophane.

Use the softest microfibre towel for drying.